VERY LOW COST DESIGN
GoodEnoughCNC hybrid is built from standard mechanical components and steel profiles, which makes it affordable. Just basic handtools needed for assembly.
Suitable for almost any application referring to the size of material. Because of the modular built the cutting dimensions can be increased with replacing only main structural beams.
Using different machining toolheads - hand-held plasma torch, a spindle, laser or some other tool GoodEnoughCNC hybrid can transform from plasma cutter to cnc mill or laser cutter.
Lighter and simpler to manufacture, the Z axis mechanism does not require milled parts like conventional solutions. We're using standard bearing slide guides available in local hardware store.
Hybrid uses fiber optic cnc machine control system, a solution we developed to get rid of ground loops and interference.
OPEN-SOURCE AND OPEN-HARDWARE
Published under open-source open-hardware licenses. Fully documented with extensive instructions for assembly available online. You can share or modify it for any purpose, even commercially.
|XYZ CNC MECHANICS|
|Cutting area||900 mm x 900 mm|
|Z travel||150 mm|
|Footprint||1430 mm (W) x 1200mm (L) x 630 mm (H)|
|Speed||1500 mm/min (max)|
|XY motion system||Timing belt and pulley (T5 or HTD5M or HTD3M)3X Nema 23 stepper motors|
|Z motion system||M8 Threaded rod 1X Nema 17 stepper motor|
|CNC CONTROL ELECTRONICS|
|RAMPS||ARDUINO + TOSLINK CNC||PLANET CNC + TOSLINK CNC|
|Voltage||12-24 V||12-36 V||12-48 V|
|Driver||Driver-stick A4988 or DRV8825||PoStep-32, PoStep-256 or THB6600 based driver||PoStep-32, PoStep-256 or THB6600 based driver|
|Current||2.5 A||5 A||5 A|
|Material||Most materials||Metal||Wood and plastic|
|Tool||Spindle||Plasma torch||Diode or CO2 Laser|
|Speed||1000 mm/s (for 3mm birch wood with 3mm mill)||1000 mm/s (for 3mm black steel)||Depends on material|
|Additionally required||/||Air compressor (30-100 l/min at 2-4 bar -effective 180 l/min)||Air compressor, water cooling|
Updated over 5 years ago